PräziSheet | Automatic cover material trimmer

Machine to cut printed cover material to size

Product information "PräziSheet | Automatic cover material trimmer"

The PräziSheet is designed for fast accurate and automatic trimming of pre-printed and/or film-laminated cover sheets to prepare them for case-making. The machine may be used as a component within the Cover-1 case-making system or as a standalone machine. It is controlled by a tablet PC included in delivery. The cover material must be printed with a black border representing the trim mark.

Process

  1. The pre-printed cover material is placed on the machine table. Sensors recognize the trim marks, suction cups hold the material and guide it into the correct position for trimming.
  2. The material is turned automatically and is ejected to the rear when trimmed.
  3. The perfectly trimmed covers are now ready for case-making and may be glued.
  4. The cut size of each sheet can differ as the machine will register the cut locations by sensing the pre-printed borders of each successive cover sheet.
Properties of "PräziSheet | Automatic cover material trimmer"
Dimensions
Depth (mm): 1020
Height (in mm): 1220
Weight: 200 kgs
Width (in mm): 1380
Output
Output (pcs/h): 250
Output level: Level 3: more than 200 pcs/h
Format range
Book height (mm): 206 - 394
Book width (mm): 257 - 750
Connectors
Air pressure supply (bar): 6
Nominal current: 10 A
Power supply: 230-240 V / 50-60 Hz
https://www.schmedt.de/ww2000/pdf/e-praezisheet.pdf

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Below you can see questions that other customers have asked about this product. Do you have a question of your own? Then feel free to ask us using the button below. You decide whether your question may be published.

Advantages

The printed material is cut on-demand and is then ready for gluing. A whole stack of material can be inserted that is then processed by the machine. All four sides are cut automatically. No format settings are necessary thanks to the automatic recognition of the size of the material by sensors. Book covers can best be produced with the PräziSheet as a component in the Cover-1 system. Nevertheless, it is also possible to use the PräziSheet as a stand-alone machine.

Animated markings image
1+
× On-demand production

Each format can be different, the machine cuts on-demand.

2+
× Automatic four-page trim

All four sides are detected by sensor and cut automatically.

3+
× Only need to enter one blank sheet format

The machine collects all the required format information via the built-in sensors.

4+
× As a component of the Cover 1 system

The PräziSheet can be used as a standalone or as a component in the Cover 1 system.

5+
× Fully automated cutting

Whole stacks can be inserted, which are then processed by the machine.

× On-demand production

Each format can be different, the machine cuts on-demand.

× Automatic four-page trim

All four sides are detected by sensor and cut automatically.

× Only need to enter one blank sheet format

The machine collects all the required format information via the built-in sensors.

× As a component of the Cover 1 system

The PräziSheet can be used as a standalone or as a component in the Cover 1 system.

× Fully automated cutting

Whole stacks can be inserted, which are then processed by the machine.

Combined in the barcode-controlled Cover-1 system

The PräziSheet is a component of the barcode-controlled Cover-1 case-making system. The Cover-1 system is a semi-automatic system for producing book cases, especially for the requirements of on-demand production. All format settings are transferred to the system via a barcode - this makes true on-demand production possible.